Technical Specifications
Table: 300 mm diameter
X: 350 mm Y: 300 mm Z: 250 mm
The Makino D200Z 5-axis vertical machining center conquers the complexities of multifaceted, contoured 3-D geometries with precision, full 5-axis machining capabilities. Its high-precision, high-speed motion control technologies enable manufacturers to maintain the tightest accuracy and quality requirements even during simultaneous 5-axis motion.
Designed with an integral chuck to maximize work-zone volume and load capacity, the D200Z accommodates workpiece sizes up to 300mm in diameter and 210mm tall with weight up to 75 kg. The X, Y and Z axes (350mm, 300mm and 250mm travels, respectively) provide swift movement with rapid traverse and cutting feedrates of 60m/min. The D200Z has also adopted a unique, lightweight B-axis tilting structure with 180 degrees (0 to +180) of tilt capability at 100 rpm. Both the B-axis and rotational C-axis (360 degrees continuous at 150 rpm) feature direct-drive motors for agile, accurate, high-speed, responsive angular and rotational operation.
Wide base castings and core-cooled ballscrews serve as a base platform for all other machine components, enhancing overall process stability. The machine’s 30,000-rpm, HSK-E50 spindle is designed with a high-tech spindle core and jacket cooling system to tightly control thermal growth, deflection and vibration during high-speed machining operations. As a result, the D200Z extends tool life and has exceptional surface finishes even in applications requiring fine tool blends and matches.
With flexible tool capacities and automation capabilities, such as the 100-tool-capacity automatic tool changer (ATC) and multiple pallet system, the D200Z can achieve utilization rates of more than 80% for the highest level of throughput and fastest return on investment.
Standard Features:
- Twenty – One (21) Tool Magazine
- 30,000 rpm, 2 range, HSK–E50 Spindle
- Automatic Spindle Lubricant Temperature Controller
- Tilt-Trunion Table (B & C axes)
- Integral Erowa Chuck & Pallet
- Machine temperature control:
- “Core Cooled” Ballscrews
- Support bearing & drive motor
- A & C Axes DD Motors
- Automatic Lubrication Supply Unit
- Base Coolant
- Nozzle Coolant
- Through Spindle Air
- Rear Discharge LUCC
- Splash and Chip Shield
- Makino Professional 6 Control
- Makino Proprietary Super Geometric Intelligence SGI.5 Software
- Laser ATLM
- AWMS (with center of rotation software)
- Five Axis Software:
- TCP – Tool Center Point Control
- DFO – Rotary Table Dynamic Fixture Offset
- TWP – Tilted Work Plane Command
- Three Dimensional Cutter Compensation
- Inversed Time Function
- Program Restart
- 3-Dimensional Manual Feed;
- Spindle-Table Interference Prevention Function
- Collision Safeguard
- Custom Macro (1,100 variables)
- Helical Interpolation
- Portable MPG
- Air Dryer
- Maintenance Advice System
- Inch/Metric Selection
- Worklight
- Programming Data Input (G10)
- Spindle Load Display
- Spindle Load Monitoring
- Tool Life Management
- Direct Spare Tool Selection
- Dual Safety Check
- Signal Light (3 layer)